Uv Aging Test Chamber also known as UV Accelerated Weathering Tester, is the most widely used weathering tester in the world. Aging Test Chamber is used for non-metallic materials, organic materials (such as: coatings, paints, rubber, plastics and their products), by the changes in sunlight, temperature, humidity, condensation and other climatic conditions to test the relevant products and materials aging phenomenon degree. Types of hazards include: browning, discoloration, loss of light, chalking, cracking and blistering, brittle strength loss and oxidation, so as to evaluate the weather resistance of the test products.
8 Precautions for use the Used Uv Aging Test Chamber:
1, the test phase should minimize the time of opening the chamber door.
2, the sensing device inside the chamber, do not suffer strong attacks.
3、During the operation of the equipment, be sure to maintain an adequate water supply.
4、Non-dedicated operators, do not operate at will.
5、If the equipment can't troubleshoot by itself, please contact the company
6、After a long period of time, if you need to use it again, you must carefully check the water source, power supply and all parts, and start the equipment again after making sure it is correct.
7、Since ultraviolet radiation has a strong radiation hazard to personnel, especially Used Uv Aging Test Chamber, so the operator should minimize exposure to ultraviolet light.
8、It is recommended that the operator wear protective goggles and sheaths.
QINSUN instrument is a global leading Uv Aging Test Chamber Manufacturer, our uv test method is advanced, test procedure is simple. Very user-friendly, welcome to order!