UV Aging Tester Operation

　　The UV Aging Tester is equipped with imported lamp tube experimental equipment,which can meet the needs of multiple industries such as coatings,inks,adhesives,and plastic products.It is used to evaluate the weather resistance of materials such as plastic rubber,paint coatings,aluminum-plastic panels,automotive safety glass,and textile printing and dyeing.

　　Main parameters:

　　1.Light source:Lamp tube wavelength:UVA-340/UVB-313;Number of lamp tubes:8;Lamp power:40W/tube;

　　2.Simulated environment:temperature,humidity,lighting,spraying,condensation;

　　3.Temperature range:RT+10℃~70℃;

　　4.Humidity range:≥95%R.H;

　　5.Blackboard temperature:40℃~65℃;

　　6.Distance between lamp tubes:35mm;

　　7.Test time:1-9999S,M,H adjustable;

　　8.Sample quantity:approximately 40 pieces;

　　9.Range of irradiance:＜50W/㎡.

　　Operation:

　　1.Firstly,prepare the accessories and test samples;

　　2.Place the sample in the sample holder and place it in the test box;

　　3.Start the instrument and enter the LCD screen operation interface;

　　4.Set parameters for condensation,irradiation,rain exposure,etc;

　　5.Click on run,inside the test box,the UV light will be on(in actual tests,do not open the box cover after the light is on);

　　6.The sample is tested inside the box;

　　7.When the set time is reached,open the box and take out the sample;

　　8.After the experiment is completed,turn off the instrument and take the sample for analysis and comparison to evaluate the material's resistance to UV aging and fading.