Fabric tensile strength tester can test the tensile strength of a material. It can test tension, compression, flexure, bursting, shear, tear, It can test tension, compression, flexure, bursting, shear, tear, elongation, elastic, thread slip, peeling, and other mechanical properties of those materials: fabric, leather, plastic, paper, etc.
1. Clamp one end of the specimen flat and vertical in the gripper, and then the other end flat in the lower gripper, and clamp the elongation auto-tracking clamps on the distance line respectively.
2. Select the type as cord and determine the range according to the approximate vigor value of the specimen, then determine the stop X% according to the characteristics of the specimen.
3. Enter the pitch of specimen No.1. Order load 1, order load 2.
4. Press the test key at the beginning of the test, and then the mechanical action of stretching; press the stop/zero key at the end of the test (the stop/zero key may not be pressed when the automation is stopped) and then stop the mechanical action.
5. The same can be done 2 times the number of specimens, 3 times the number of testing machines, 4 times the number of specimens ... Test, pay attention to 40 times the test machine in the standard distance, stapled load 1, stapled load 2 values shared, the same requirements.
6. After pressing the print button can be single or full typing.
If you have any doubts about the operation and use of the test machine or do not know how to select the model, feel free to consult the technical staff of Sida, we will carefully explain zui professional knowledge for you.
If you want to know about the working principle of tensile testing machine or Fabric Tensile Strength Tester price information, please send us a message.