Introduction
· This device can be used to measure high temperature, low temperature, thermal-cold cycling, constant temperature and humidity, rapid temperature change, and alternate change between high and low temperature.
· Temperature rise and fall, humidification and dehumidification can be controlled separately. Hence, the efficiency of the device is improved to save over 20% electricity, lower the breakdown rate, prolong the service life span and decrease the test cost.
· The touch setting mode is controlled by microprocessor with 12 sets of P.I.D automatic calculation function, which controls the temperature and humidity more precisely.
· The deviation of temperature and humidity can be revised by programming.
· When breakdown occurs to the temperature probe, it can be automatically detected.
· Automatic water circulation or water supplement.
Features
· TFT、LCD color screen
· USB interface
· Nitrogen welding in the whole process
· Load calorific value up to 800℃
· Compressor vibration and noise is eliminated through a special vibration-absorbing material.
· Double protection against over-temperature empty burning.
· Superconducting evaporator film treatment, can improve the efficiency of 10%.
· The binary refrigeration system uses plate-type heat exchange.
· Stainless steel single shaft fan motor
· Test stand stainless steel passivation treatment does not produce electrochemical corrosion
· Servo refrigerant servo valve drive.
· System-wide compressor three-year warranty.
· Sweden original longevity ultrasonic humidifier, energy saving and environmental protection.
Technical Parameter
|
Model |
TMJ-9712A |
TMJ-9712B |
TMJ-9712C |
|
Internal dimension (WxDxH)mm |
400x400x500 |
500x500x600 |
1000x800x1000 |
|
External dimension (WxDxH )mm |
1050x700x1360 |
1160x800x1460 |
1650x1100x1860 |
|
Temperature range |
-30℃~100℃ |
-40℃~150℃ (-70℃~200℃) |
|
Humidity range |
10%~98%RH at 10℃~85℃ |
|
Accuracy |
Indication |
Temperature ±0.3℃ Humidity±2.5%RH |
|
Uniformity |
Temperature±0.5℃ Humidity±3.0%RH |
|
Control system |
Programmable temperature and humidity |
|
Power consumption |
220V single phase |
220V single phase |
220V 3Φ 4W 380V 3Φ 5W |
|
Option |
Temperature recorder 6 points |
Introduction
