Test operation method of glow wire tester/glow wire test machine
This glow wire tester simulates the thermal stress caused by the heat source or ignition source such as hot element or overload resistor in a short time under f......
02-26
Current Healthcare Protective Clothing Standards and Specifications
GB 19082-2009 YY/T 0700-2008 ISO 16603:2004 ASTM F1670 ASTM F1671...
03-04
ASTM Releases New Voluntary Safety and Performance Standard for Face Coverings ASTM F3502-21
ASTM Releases New Voluntary Safety and Performance Standard for Face Coverings In response to industry and consumer demand created by the COVID-19 pandemic, AST......
03-10
FFP standards EN149
EN 149 is a European standard of testing and marking requirements for filtering half masks. Such masks cover the nose, mouth and chin and may have inhalation an......
03-16
Walter Thermal manikin ship to National Textile University Pakistan
QINSUN WALTER Thermal manikin system ship to PakistanNational Textile University National Textile University (NTU) Karachi campus hasbeen established at Synthet......
03-16
The hydrostatic pressure test of the fabric and its influencing factors
Hydrostatic pressure tester is one of the important indexes of waterproof and moisture-permeable fabrics. Hydrostatic pressure refers to the resistance encounte......
03-22
How to use the rating observation board
The rating observation board is to evaluate the wrinkle, smoothness and stitch marks of textiles, as well as oil stains, etc., and provide accurate AATCC standa......
03-25
What are the applicable standards for protective clothing blood penetration testers
The protective clothing blood penetration tester is suitable for measuring the resistance of protective clothing, surgical gowns, isolation gowns, and daily wor......
03-29
QINSUN G505 Filtration Efficiency Tester Project of Institute of Flue Gas Pollution Control Tsinghua
University introduction The School of Environment of Tsinghua University originated from the Department of Municipal Engineering established in 1928. Under the ......
04-01
Button strength tester operation process
The button strength tester can do a uniform and vertical tensile test on various buttons on the clothing to detect whether the firmness can meet the relevant sa......
04-07
Test steps of zipper fatigue tester
The zipper fatigue tester is used to test whether various zippers can withstand a specified number of reciprocating pulling operations under the action of trans......
04-12
Basic knowledge of textile and clothing inspection and testing
The textile and clothing industry is closely related to our daily lives. Testing on textiles also includes many items. With the rapid economic development, test......
04-16
Textile fabric testing does not pass common problem analysis and how to solve and improve
Analysis of common problems that textile fabrics fail to test and how to solve and improve them. There are two common aspects of testing items. One is a physica......
04-22
Chrysler bending tester test steps
The Chrysler bending tester is designed to test the adhesion of the coating material on the base fabric by bending and folding, that is, the mechanical stabilit......
04-26
Analysis of the structure and principle of the washing durability tester
Paint is a special main material in home decoration, accounting for 80% of the entire decoration area. The paint directly determines the overall decoration effe......
04-30
Main features of hydrostatic pressure water resistance tester
The hydrostatic pressure tester is suitable for outdoor sportswear waterproof test, umbrella test, waterproof fabric test; jacket, medical protective clothing p......
05-08
How to do the pilling test with the circular trajectory pilling instrument
The circular trajectory pilling instrument is used to test the pilling condition of wool fabrics, chemical fiber cotton, blended spinning, knitting, and woven f......
05-12
What are the textile quality inspection items
The quality inspection report is a written report that reflects the quality of the product and the project after performing quality inspection and quality super......
05-17
Main parameters of curtain burning tester
The curtain burning tester is used to test the flame retardancy of single-layer or multi-layer curtains, curtains and other suspended fabrics, but it cannot be ......
05-20
ASTM F1955 test experiment
1. This standard specifies the testing methods and requirements for sleeping bags: 1). The average burning speed does not exceed 15cm/min (6in./min) 2). The bur......
05-25