Bursting Strength Tester is widely used in textile , leather , paper and other fields. The bursting strength and height of woven, knitted, non-woven fabric, paper or board are measured by air pressure drum. It is the basic equipment for testing physical strength and strength of materials.
Common models for the C, A
ASTM D3786，AS2001.2.4，BS EN ISO 13938-1，GB/T 7742，ISO 13938-1，JIS L1018/L1093，IWSTM170
1, the use of Mitsubishi 16-bit industrial-level MCU control, with strong anti-interference ability;
2, Equipped with Putian MT-300K printer, a test report can be printed with the output data.
▶ GB/T 7742.1 Textile fabrics bursting properties - Part 1: Determination of bursting strength and expansion ratio;
▶ ASTM D3786 Test method for hydraulic bursting strength of textiles: diaphragm type bursting strength test method;
▶ BS EN ISO 13938-1 Textile bursting characteristics, Hydraulic method for bursting strength and bursting expansion;
▶ BS 3424-6-B Hydraulic method for determining fabric bursting strength;
▶ ISO 3303-B/3303.2 Glued or plastic coated fabrics. Determination of tear strength;
▶ ISO 2758 Paper. Determination of brittle fracture strength;
▶ ISO 3689 Determination of bursting strength after immersion;
▶ JIS L1018 Test method for knitted fabric;
▶ JIS L1093 Test method for gap strength of textiles;
▶ IWS TM170 International Wool Bureau Standard
Scope of application:
Digital bursting strength tester is used for the detection of woven, knitted, non-woven fabrics, paper or board about the bursting strength and height.
A. Meet the maximum 100cm2 test area
B. Uniform clamping force, can be applied to all kinds of materials in all directions
C. Support online communication
D. Experimental area can be replaced, suitable for different standards
E. Store 50 custom standards
F. Test results such as: rich burst strength, bursting strength, diaphragm pressure, bursting height, and bursting time; make quality control personnel comprehensively understand the bursting performance of the sample.
G. Security shield automatic detection can automatically correct and exclude the film itself on the results
A. Pressure: air pressure method
B. Measuring range: 0-1000kPa, accuracy: 0.2%
C. lower clip ring: 7.3cm2, 7.8cm2, 10cm2, 50cm2, 100cm2
D. Maximum expansion: 70 ± 0.02mm
E. Pressing rate: 1 ~ 100 kPa / min, speed adjustable
F. Output: print output, display output, real-time color graphics display
G. Power supply: Ac220V 50Hz 2000W
1. One host
2. A set of the next clip ring (5)
3. Expanded broken film 1 package
4. Silent pump 1 set
5. Glycerine 1 bottle
6. Test rubber film （2 pieces）
7. Mute laboratory air compressor (optional)
What is the difference between Mullen and G229B pneumatic bursting strength tester?