-
Fabric Pilling Tester
The instrument is used to test the pilling conditions of wool fabric, chemical fiber cotton, and blended, knitted, woven fabric to identify product quality and process effect. When testing, the fabric is rubbed against nylon brush and abrasive, or rubbed against abrasive only in the humidity state.
Circular Locus Pilling Tester Standard:
GB/T.1Determination of pilling properties of textile fabrics - Part 1: Circular trajectory method
JIGBell-type gas flow standard device verification procedures
DIN.2Testing of textiles - Wear test of flat fabrics – Roll to millTechnical Parameters:
1.Contact gap between abrasive assembly and abrasive platform: ≤0.2mm;
2.Parallelism of grinding head and grind plane: ≤0.3mm;
3.Moving locus:￠40mm circle track moving;
4.Nylon brush with paralleled surface, the altitude difference: ＜0.5mm;
5.Reciprocating speed of abrasive platform: 60±1r/min;
6.Weight of grinding head: 490cN±1%;
7.Weight of larger loading weight/pieces: 290cN±1%;
8.Weight of little loading weight/pieces: 100cN±1%;
9.Times of options: 1～9999;
10.Meet the requirements of standard tests.
Circular Locus Tester Test Reference
Sample type
Pressure / cN
Number of fluff times
Number of pilling times
Synthetic fiber knitted fabric
590
150
150
Chemical fiber woven fabric
590
50
50
Military service (combed blended)
490
30
50
Combed wool fabric
780
0
600
Coarse wool fabric
490
0
50
Product Display:
