-
Electronic circular locus tester
Product Information:
The electronic circular locus tester is used for determining the pilling and fuzzing of all kinds of fabrics to evaluable the product quality and process, such as wool, chemical fiber, mixed, kitted and woven fabrics. During the test, fabric is rubbed against a nylon brush and abrasive, or only against an abrasive under controlled conditions.
Fabric Pilling Tester Features
1. Scientific mechanical structure, smooth rotation, no mechanical noise, no contact fatigue failure, suitable for long continuous operation.
2. The use of standard nylon brush, the rigidity of nylon wire must be uniform, so as to control the fluff effect of nylon brush.
3. Ergonomic design, the surface using a spray forming, smooth and beautiful.
Standard
GB/T.1Determination of pilling properties of textile fabrics - Part 1: Circular trajectory method
JIGBell-type gas flow standard device verification procedures
DIN.2Testing of textiles - Wear test of flat fabrics – Roll to mill
Test ParametersItems
Parameters
Grinding head is in contact with grinding plane
≤0.2mm
The parallelism of grinding head and grinding plane
≤0.3mm
The relative movement trajectory of grinding head and grinding plane
40±1mm
Nylon brush surface is flush, its height difference
<0.5mm
Grinding plane reciprocating speed
60±1 times/min
Weight of grinding head
490cN±1%
Weight of heavy hammer
290cN±1%
Weight of hammer
100cN±1%
Select the number of times
1~9999
