Button strength tester operation process
The button strength tester can do a uniform and vertical tensile test on various buttons on the clothing to detect whether the firmness can meet the relevant sa......
04-07
Test steps of zipper fatigue tester
The zipper fatigue tester is used to test whether various zippers can withstand a specified number of reciprocating pulling operations under the action of trans......
04-12
Basic knowledge of textile and clothing inspection and testing
The textile and clothing industry is closely related to our daily lives. Testing on textiles also includes many items. With the rapid economic development, test......
04-16
Textile fabric testing does not pass common problem analysis and how to solve and improve
Analysis of common problems that textile fabrics fail to test and how to solve and improve them. There are two common aspects of testing items. One is a physica......
04-22
Chrysler bending tester test steps
The Chrysler bending tester is designed to test the adhesion of the coating material on the base fabric by bending and folding, that is, the mechanical stabilit......
04-26
Analysis of the structure and principle of the washing durability tester
Paint is a special main material in home decoration, accounting for 80% of the entire decoration area. The paint directly determines the overall decoration effe......
04-30
Main features of hydrostatic pressure water resistance tester
The hydrostatic pressure tester is suitable for outdoor sportswear waterproof test, umbrella test, waterproof fabric test; jacket, medical protective clothing p......
05-08
How to do the pilling test with the circular trajectory pilling instrument
The circular trajectory pilling instrument is used to test the pilling condition of wool fabrics, chemical fiber cotton, blended spinning, knitting, and woven f......
05-12
What are the textile quality inspection items
The quality inspection report is a written report that reflects the quality of the product and the project after performing quality inspection and quality super......
05-17
Main parameters of curtain burning tester
The curtain burning tester is used to test the flame retardancy of single-layer or multi-layer curtains, curtains and other suspended fabrics, but it cannot be ......
05-20
ASTM F1955 test experiment
1. This standard specifies the testing methods and requirements for sleeping bags: 1). The average burning speed does not exceed 15cm/min (6in./min) 2). The bur......
05-25
Operation steps of fabric wettability tester
The fabric wettability tester can be used to evaluate the water repellency of the fabric surface. The instrument is an all-metal frame. Quantitative distilled w......
05-31
Button tension tester calibration steps
The button tension tester is used to test the adhesion strength of buttons, buttons and fasteners on the garment, and to measure the fastening force of the butt......
06-05
Test procedure of fabric wrinkle recovery tester
The fabric wrinkle recovery tester is suitable for testing any fabric made of pure or blended fibers. It is used to test the recovery ability of the sample unde......
06-19
Precautions for Use of Velcro Fatigue Tester
The hook and loop fastener fatigue tester simulates its actual use process through a certain number of clutch and hook surface separations, measures its shear s......
06-25
The Application of Flame Detector in Boiler Combustion Flame Detection
Usually, when a substance burns, it produces a lot of smoke and heat, and it also produces visible or invisible light radiation that is not in the atmosphere. F......
06-30
Failure analysis of common textile air permeability tester
The textile air permeability tester is a special instrument in textile testing equipment(instruments). The internationally popular air permeability tester has t......
07-30
QINSUN Instruments dry goods sharing丨fabric composition analysis
The fabric wettability tester can be used to evaluate the water repellency of the fabric surface. After the fabric is identified by the combustion method, it ne......
07-30
Do you kown what is the multi-finger scratch/mar tester 710?
Multi-finger scratch/mar tester 710 is used to measure the susceptibility of material surfaces to scratching, marring, gouging, and other similar physical damag......
08-02
Introduction of several methods of leather abrasion resistance test
For leather abrasion resistance test methods, there are currently three test methods: STROLL abrasion method, TABER abrasion method and Martindale abrasion meth......
08-02