Universal Wear Resistance Tester Operation-Qinsun

　　G282 Universal Wear Resistance Tester is equipped with a flat grinding test head(inflatable film friction test method)and a curved grinding test head,as well as the required weights and sandpaper.It can perform wear tests such as flat grinding,curved grinding,edge grinding,edge grinding,frost resistance,edge closing,and pilling.The tested sample can be in a dry state or immersed in water,oil,or other liquids.It can be used for woven fabrics,knitted fabrics,coated fabrics,plush fabrics,socks,felt,non-woven fabrics,etc Deep fabric,yarn,string plastic film,rubber,leather,paper,and various other materials.

　　Applicable standards:

　　ASTM D3514 D3885 D3886,AATCC 119/120,FORD EFB 15J2/BN 112-01,etc

　　Technical parameters:

　　1.Inner diameter of clamping ring:94 mm;

　　2.Locking ring height:≤9.5 mm;

　　3.Speed:120±15/min;

　　4.Travel:25 mm;

　　5.Air pressure:62kPa(9psi);

　　6.External dimensions:330×five hundred×460mm(length×wide×High;

　　7.Weight:33kg(72lb);

　　8.Power supply:120/230 V,50/60 Hz,2A/1A

　　Operation:

　　1.Firstly,prepare the accessories and test samples;

　　2.Use a sample wrench to disassemble the fixture;

　　3.Install the eardrum and sample into the fixture;

　　4.Tighten and secure the fixture;

　　5.Fix the abrasive onto the upper fixture;

　　6.Install weights;

　　7.Open the instrument and enter the operation interface;

　　8.Set the number of turns and adjust the air pressure value;

　　9.The sample expands to a certain height as the air pressure increases;

　　10.Lower the upper fixture to allow the abrasive to come into contact with the specimen;

　　11.Press the start button;

　　12.The abrasive and the sample undergo continuous frictional motion;

　　13.The sample is worn out and automatically stops;

　　14.At the end of the experiment,take the sample for analysis and comparison to evaluate the surface wear resistance of the material.

　　Advantages and characteristics:

　　1.Have a strong after-sales service team;

　　2.Able to handle various issues in a timely and fast manner,relieving customers of any worries they may have;

　　3.Complete spare parts to solve the problem of long lead times when ordering spare parts;

　　4.Keep up with industry standards updates and provide textile testing instruments that meet the new standards in a timely manner.