G185 Leather Moisture Permeability Tester Operation

　　G185 Leather Moisture Permeability Tester is applied to leather and textiles used in shoe uppers and clothing,measuring the sweating ability of the material on the wearer's skin.

　　Compliant with standards:

　　UNI EN IUP/15,UNI EN 13515,EN ISO 20344:6.6,IUP 15,BS 3144,Method 24,SLP 25,DIN 53333,ISO 17699,DIN 53 429,METODO-309 WI 009

　　Operation:

　　1.Firstly,prepare the accessories and test samples;

　　2.Place the sample in a test cup filled with silicone desiccant;

　　3.Place the test cup on a balance for weighing and record the value;

　　4.Open the metal safety door of the instrument;

　　5.Install the prepared test cup into the instrument workstation,tighten and secure it;

　　6.Close the metal safety door of the instrument;

　　7.Set the number of operating cycles;

　　8.Press the start button;

　　9.The testing workbench continuously rotates in cycles;

　　10.When the set rotation value is reached,the instrument automatically stops;

　　11.Remove the test cup from the workstation;

　　12.Weigh the test cup again and record the values;

　　13.After the experiment is completed,turn off the instrument;

　　14.At the end of the experiment,the permeability of the material is determined by calculating the weighing values before and after the test cup containing the sample and silicone desiccant.