-
What's the Air Filter Performance Test Equipment?
Edited by:Read：The Air Filter Performance Test Equipment is suitable for dry and wet (oil bath), pilot air filter assembly.
Technical Parameters:
Air flow range 15-3000m3/h (Under standard atmospheric conditions) Air flow measurement accuracy ±0.5% In front of nozzle cavity stagnation
pressure measurement range
0~110kPa The accuracy of the absolute
pressure transmitter
±0.25% In front of nozzle cavity stagnation
temperature measurement range
0~100°C Accuracy of temperature sensors A grade Air flow measurement method: with a critical flow venturi nozzle measuring air flow rate of air flow measurement accuracy and stability of the highly critical flow venturi nozzle. System through the flow ratio of multiple relationship (1,2,4,8, ...), a number of automatic composition and pressure of the sonic nozzle automatic pressure regulating valve to adjust the air flow setting and continuously adjustable.
Powder Feeder:
The amount of powder 1~100g/min Power bucket one-time Max. load amount of powder 1000g Accuracy every 5 minutes plus ash content does not change more
than 5% of the average ash content
Air intake resistance measurement:Measuring range: 0~40kPa
Accuracy: ±0.1%
The intake resistance automatically recorded by the computer the data sampled by the display, and can draw the intake resistance curve.
- 2024-04-19Paper ring compression strength tester standards
- 2024-04-19Cupping tester standards
- 2024-04-19Rubber and plastic tensile tester standards
- 2024-04-19Taber 1750 wear-resistant tester standards
- 2024-04-19Stone Chip Resistance Gravelometer standards
- 2024-04-18Diaper absorption speed tester standards
- 2024-04-18Diaper leakage tester technical indicators
- 2024-04-18Paint film impact resistance tester standards
- 2024-04-18Low temperature brittleness tester principle
- 2024-04-18Battery separator permeability tester technical indicators
