How to properly maintain the 45 Degree Flammability Tester?

The 45 Degree Flammability Tester is an instrument used to measure the combustion properties of materials. It can measure the complete burning time, maximum burning rate, change in illumination, burning temperature and other performance indicators to determine the combustion properties of the material.

The 45 Degree Flammability Tester is used extensively and frequently in the textile and materials industry, so wear and tear is inevitable during long-term use and must be maintained regularly.

How to properly maintain the 45 Degree Flammability Tester?

1. Before using the 45 Degree Flammability Tester, you must pay attention to whether the voltage of the power supply used matches. When using, the grounding wire of the power outlet must be grounded according to the regulations.

2、When using, do not touch the electrical part of the instrument with your hands to avoid electric shock.

3, regularly clean the surface of the 45 Degree Flammability Tester and dust inside the box.

4、Check the ammeter regularly for any abnormalities.

5、Regularly check whether the fan is running normally and whether there is any abnormal noise.

6、Regularly check whether the ventilation openings are plugged and clean the dust.

7、Regularly check whether the thermostat is, if not, adjust the static compensation or sensor correction value of the thermostat.

8、Regularly check whether there is any abnormality in the heating tube.

9、Check regularly whether the delay timer is.

10、Unplug it when the power goes out to prevent automatic start when it comes in.

Why choose QINSUN Instruments ?

1.Excellent After sale Service: 12 months warranty.

Besides, we can help you to repair your problem controller freely, even it's not from our factory. what you need to do is to send us the What you need to do is to send us the controller.

What you need to do is to send us the controller. 2:

We will sign a letter of commitment while we sign the contract, which will improve your confidence to us.

Good Packaging: 

Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock The air bubble film is used to seal the wood case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of non-toxic, odorless, moisture corrosion, good transparency etc.