In order to safeguard the life of the fabric tear strength tester and the safety of the operator, you must pay attention to the following matters.
1, the use in industrial production is very extensive, its automatic control system is an important part of the work. In the automatic control program of the instrument, there is a test value determination procedure, the test data will be automatically deleted for obvious errors; also need to pay attention to if the instrument automatically delete the current test value several times in a row, then generally the zero value has been offset, then you should press the zero key to re-zero before continuing the test, otherwise the resulting test value will have a large deviation. Each time you turn on the machine and start a new set of tests, you must press the reset button to restart the instrument, otherwise the data processing is not correct; non-professional calibration and maintenance personnel, shall not be arbitrarily calibrated, otherwise the instrument will be inaccurate force measurement.
2, the use of its curve printing ratio span is very large, for this reason, its use than the general use of the machine is more convenient, and more flexible, can be set according to the need to choose the ratio on the good. The machine is very powerful in terms of its data query function and can be used as the basis for statistical analysis based on any number of data and curves. It is understood that the parameters of the machine have an automatic error correction function, which makes it much less likely that errors will occur, an important prerequisite for accuracy. This is an important prerequisite for accuracy, as the equipment has a wide range of test parameters inside, which is an important basis for ensuring that more tests can be carried out.
3. Before each start, you need to do a set of tests, press the reset button and let the instrument restart, otherwise the data processing will be displayed incorrectly; the instrument reset and press the zero button, both contain the function of automatic zeroing of the force sensor, please note that when starting the instrument to keep the upper gripper in addition to its own self-weight, there is no other additional force, otherwise the tare is not allowed, which will lead to inaccurate testing; the instrument input set parameters. The instrument should be entered before a set of tests is started, otherwise the data will be processed incorrectly. Please note that if the instrument automatically deletes the current test value several times in a row, it is usually because the zero value has been shifted and should be re-zeroed by pressing the zero button before continuing the test.
QINSUN instrument is a textile testing instrument research and development manufacturers, research and development and production of fabric tear strength tester has more than 10 years, technical engineers said, in order to allow users to use safely and securely, for the use of attention to do the following simple instructions.