Site： Home > News and events 
The Test Method of Nail Bed Flammable Tester
The tester is designed for determining the flammability of cloth toys and plush toys, used in the detection of flammability of flammable hair, and recording the burning time, to make a assessment whether the flammability of the burning part meet the requirement of standards.
Nail bed burning tester is mainly used to test the flammability performance for stuffed toys and plush toys according to ASTM standard. Put the specimen on the flammability testing nailed fixture, light the specimen with specified fire source, count the burning time and burning statue, check if it meets the requirement of the standard.
Standard: ASTM F963 section A5
Flammability Testing Nailed Fixture Test Method:
1.Put the specimen on the flammability testing nailed fixture according to the standard.
2.Hold the burning paraffin candle whose flame height is 16mm, maintain the contact of candle with the specimen for 5s or until ignition occurs.
3.If the specimen melts away from the flame, remove the candle and maintain contact for the full 5s or until the specimen ignites.
4.If the ignitions occurs immediately, hold the candle steady and allow the ignited flame to move away.
5.Check the burning statue according to standard ASTM F963 Annex 5. Calculate the burning speed.
2020-09-18 11:21
- Related News
Ozone Aging Test Chamber: Understanding Four Concentration Test Methods
How to properly maintain the horizontal and vertical combustion tester?
What you must know about the Xenon lamp aging test chamber filter
Application of Ventilation Aging Test Chamber on Polymer Materials
3 Tips for Purchasing Aging Test Chambers
Matters that must be avoided in the operation of the UV aging test chamber
How to use the UV aging test chamber lamp correctly?
Wire and cable test artifact - ozone aging test box
3 aging factors that must be simulated in the aging test box
The role of Burning Manikin System in the field of thermal protection