Advanced multi-specification fuel water separator test station

This test stand, meets ISO 16332,SAE J1488 and SAE J1839 standards, is an unattended automatic system for testing fuel /water separators on diesel engines.
This system uses automatic injection, sound wave degradation and titration system, with high precision and high reproducibility.

Application 

Items	Parameters
Flow range	1-25 Lpm
Flow precision (double flow meter)	0.1%
Temperature control	±2ºC
Static pressure control	0-140 kPa ±14 kPa (0-20 psig ±2 psig)
Pressure difference control	1-260 hPa ±1 hPa (0-4 psi ±0.15 psi)
Fuel tank capacity	325 L
Fuel tank export configuration	SAE & ISO
Tank capacity	15 L
Box and poping materials	Stainless steel
Bleaching earth modulation circuit	Included
Optional fuel preparation	75 L，Attached bleaching earth treatment system

Circuits analysis

Items	Parameters
Auto-injection &Auto-titration	Real-Time Results
Reproducibility	2%±0.1%
Water content titration measurement system	Reproducibility 0.3%

Water circuits

Items	Parameters
Ionic water supply rate	0.9 Lpm
Metering pump injection	Automatic Accurate proportional  control
Injection rate	1.0-576 mLpm
Filter grade	30 ppm @ 25 Lpm w/ drainage
Optional water collection car	75 L

UI，Controller and DAS

Items	Parameters
CPU	Dell OptiPlex w/ Intel Core™ Processor
Operation sytem	Microsoft Windows 7
UI	22" LCD Display，Keyboard and Mouse
I/O Hardware Platform	CompactRIO
Application	Custom NI LabView executable w/ graphical displays，满足 ISO 16332, SAE J1488 & SAE J1839 procedures
Data Output	Output test reports,xlsx files in tables and charts

Operating Requirement

Items	Parameters
Power Supply	480 Vac/3Ph/ 60Hz/25A (International Voltage Available)
Tap-Water	1.0 Lpm @ 400-700 kPa (.26 gpm @60-100 psig)
Colling Water	Customization
Compressed Air	0.14 m3/min @ 550 kPa (5 cfm @ 80 psig), Dry and Oil free
Ventilation Installation	150mm (6") Connect
Environment Temperature	10-40 ℃ (50-104℉)
Noise Output	82 dBA